1. Use method
Connect the power supply and load, for a power supply, the
a controller can be displayed for measuring temperature, according to
a SET key, the screen flashing temperature; Press + – to SET the
required temperature, SET according to a SET confirmed return, after
the completion of the controller according to the SET automatically
relay on and off!
The thermostat for 10 A output relay, meet all kinds of high power
load, please ensure that the circuit is correct.
2. The indicator lights, digital tube status
Light: light off shows relay disconnect, normally on a show that the
relay has closed
For sense: digital tube display “’LLL”; display “HHH” is beyond the
measuring range thermostat will force disconnect relay
3. The parameter function
Long press SET 5 seconds can be set to enter the main menu; press +
– switching P0…P6 long press SET or 10 seconds without buttons
the controller automatically confirms the return.
Themostat XH-W1209
Availability: 9 in stock
Quick Overview
Product model: XH-W1209
Sales department: 1pc / lot
Control range: minus 50 to 110 degrees Celsius
Lamp colour: Red lamp
Temperature measurement accuracy: 0.1 degrees Celsius
Control precision: 0.1 degrees Celsius
Hysteresis accuracy: 0.1 degrees Celsius
Refresh rate: 0.55
High-temperature protection: 0 to 110 degrees Celsius
Input Power: DC12V
Measurement input: NTC (10K 0.5%) waterproof sensor
Output Range: All Relays 10A
Environmental requirements: minus 10 degrees Celsius to 60 degrees Celsius humidity 20% to 85%
Specification size: 48 * 40mm
Power consumption: Quiet current: less than or equal to 35mA
Current: less than 65mA
Display Type: 0.28 inch, three digital tubes
Line length: 50cm
9 in stock
1 review for Themostat XH-W1209
Powered by Customer Reviews plugin
Dan (verified owner) – :
Good for making incubators, the wild temperature range also makes it good replacement for fridge thermostat
My order was delivered on time and in good condition.