Placeholder

SD Card Shield V3.0

Availability: Out of stock

Sku:

Be the first to review this product

Quick Overview

The SD card v3.0 shield adds storage to your Arduino project. It supports SD, SDHC, or MicroSD TF cards. Use the onboard toggle switch to select the SD card type. The card supports the use of one and only one format of SD card, either SD/SDHC or MicroSD. Before using an SD or MicroSD card, please set the shields “SELECT” switch to the proper setting: toward the SD/SDHC slot, or the MicroSD slot.

Out of stock

Categories : General, Breakout Boards

The SD Card shield v3.0 makes use of pin 10 as a chip select. Please be sure other stacked shields do not make use of that same pin. See v4.0 of this shield for a version that uses pin 4.

These next lines were user added: This shield works fine for the Arduino Mega 2560, you just have to make the appropriate connections. 4or10 ->53, 11->51, 12 ->50, and 13 ->52. This arrangement works fine so long as you make sure not to assign anything else to those pins.

Features

  • Arduino/Seeeduino compatible( Do not compatible with Mega)
  • Grove compatible
  • SD card, Micro SD card, and SDHC card supportable
  • 3.3v and 5v logical voltage compatible
  • 2.6~3.6v DC power supply

    Specification;

    Item Min Typical Max Unit
    Voltage 2.7 3.3 3.6 V
    Current 0.159 40 200 mA
    Supported Card Type SD card(<=2G); Micro SD card(<=2G); SDHC card(<=16G) /
    Dimension 57.15×44.70×19.00 mm
    Net Weight 16.6 g

Reviews

There are no reviews yet.

Be the first to review “SD Card Shield V3.0”

Your email address will not be published. Required fields are marked *

Top