A simple flex sensor 2.2″ in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol – they claim these sensors were used in the original Nintendo Power Glove.
Flex Sensor 2.2″
Availability: Out of stock
-Life Cycle: >1 million
-Height: 0.43mm (0.017″)
-Temperature Range: -35°C to +80°C
-Flat Resistance: 10K Ohms ±30%
-Bend Resistance: minimum 2 times greater than
the flat resistance at 180° pinch bend (see
“How it Works” below)
-Power Rating: 0.5 Watts continuous; 1 Watt
Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.
Out of stock
Notify me when new stock arrives
Already 2 persons shown interest.