433MHz RF Wireless Transmitter & Receiver Module Pair

Overview

This 433MHz Wireless Transmitter Modules allow your Arduino to wirelessly communicate with other Arduinos, or with radio frequency (RF) controlled devices that operate in the same frequency (433Mhz in this case).

They work in pairs, meaning you need both a receiver and a transmitter to comunicate with each other.
The receiver has 4 pins, but we actually use 3 of them: GND (Ground), VCC (5V) and one DATA pin.

Technical Details:

TX (Transmitter) Technical Specifications

• Working voltage: 3V～12V
• Working current: max≤40mA (12V), min≤9mA(3V)
• Resonance mode: sound wave resonance (SAW)
• Modulation mode: ASK /OOK
• Working frequency: 315MHz-433.92MHz, customized frequency is available.
• Transmission power: 25mW (315MHz at 12V)
• Frequency error: +150kHz (max)
• Velocity: ≤10Kbps
• Self-owned codes: negative

RX (Receiver) Technical Specifications:

• Working voltage: 5.0VDC +0.5V
• Working current:≤5.5mA (5.0VDC)
• Working principle: single chip superregeneration receiving
• Working method: OOK/ASK
• Working frequency: 315MHz-433.92MHz, customized frequency is available.
• Bandwidth: 2MHz (315MHz, having result from testing at lowing the sensitivity 3dBm)
• Sensitivity: excel –100dBm (50Ω)
• Transmitting velocity: <9.6Kbps (at 315MHz and -95dBm)

Package:

• 1 Transmitter
• 1 Receiver

Tutorial